Changing batteries in the Sphere wireless light switch

If you notice your motorhome's lights flickering, it might be time to change the batteries in your light switches. Follow these steps to ensure all three switches (A/C panel, dinette, and bedroom switch) are correctly serviced.

Tools Needed:

• Phillips head screwdriver
• Replacement batteries (CR2032) x 6

Step-by-Step Guide:

Step 1

Identify the Light Switches:

• Locate all three light switches: the A/C panel switch, the Dinette switch, and the bedroom switch

Step 2

Remove the Light Switches from the Bracket:

• Using a Phillips head screwdriver, remove the small screw located at the bottom of each switch.
• Gently pull each switch away from its mounting bracket.

Step 3

Remove the Battery Covers:

• Turn each switch over to access the rear.
• Locate the battery cover and remove the Phillips head screw securing it.
• Lift off the battery cover to expose the batteries.

Step 4

Replace the Batteries:

• Carefully remove both batteries from each switch.
• Insert new CR2032 batteries into each switch, ensuring the writing on the batteries is facing upwards.

Step 5

Reassemble the Switches:

• Replace the battery cover on each switch and secure it with the Phillips head screw.
• Reattach each switch to its mounting bracket and replace the small screw at the bottom of the switch.

Step 6

Test the Switches:

• After reassembling, test all switches to ensure they are functioning correctly.
• The flickering of the lights should cease.

By following these steps, you can easily replace the batteries in your Sphere Lighting system and maintain optimal functionality.